10 Movie Cars That Are Impossible in Real Life

The cars of the main characters of popular films sometimes amaze the viewer with their originality – this is especially true for unique items that you cannot buy at a car dealership. In many art paintings, it is the vehicle that is a real symbol and almost a separate hero. Unfortunately, often it is only an element of cinema, inaccessible in ordinary reality. Of course, ardent fans can sometimes purchase a car that has become the basis for some on-screen models. However, it will certainly not be slightly different from copies from the big screen.

Gigahorse from Mad Max: Fury Road (2015)

An unusual monster truck was driven by Immortal Joe. This miracle was assembled from two Cadillac Coupe de Villes of 1959 – they are located one above the other. A rather ridiculous design rests on a unique suspension, and this “crumb” is powered by a pair of Chevrolet engines of 8 liters and 500 horsepower each. The initial concept implied a slight deception of the viewer: the external engines were supposed to be purely decorative, and the car would drive on the third internal one. Later, the idea was revised and the engines were connected through a gearbox for trucks. In the film, the Gigahorse developed up to 125 kilometers per hour, which with this arrangement would not be possible in real life.

Ford Crown Victoria from Men in Black (1997)

Such a car is ideal for Agent Kay – it is as discreet as possible, extremely concise and 100% reliable. However, pressing a small red button immediately turns an ordinary car into a super-high-speed marvel of technology. In one of the episodes of the picture, when this mode is activated, two jet engines leave the rear of the body. They allow you to accelerate to almost supersonic speeds and actually violate any laws of physics. The car rides upside down without any problems and performs other amazing somersaults that are impossible in real life. Fans of the film can still get a similar car: Ford made 128,878 copies of this model in total, but of course there is no secret button in them.

💡 amusingthat with a budget of only $ 90 million, the box office receipts of the film exceeded 587 million. This allowed her to enter the top 3 most profitable films of her time right after Titanic and Jurassic Park: The Lost World.

Spinner from Blade Runner (1982)

The protagonist of the sci-fi movie was driving around Los Angeles and catching replicants in a flying car. It and several other vehicles were designed by the famous futurist Syd Mead. The streets of Los Angeles of the future are clearly overloaded with traffic. The city’s police department has been using aircraft for a long time, and there are landing pads on almost all buildings in the city. The Spinner is equipped with three power units at once: a conventional internal combustion engine, an additional jet-powered engine and an anti-gravity system that allows you to move through the air. The machine rises upwards due to the downwardly directed air flow. Today, the legendary car can be admired in the permanent exhibition of the Museum of Science Fiction in Seattle. In real life, nothing like this is still possible – even 40 years after the release of the picture.

The Batmobile from The Dark Knight (2008)

It was in this film adaptation of the superhero story that the most entertaining version of his vehicle was demonstrated. The model was created by hand, and the Batmobile turned out to be almost 3 meters wide and 4.5 in length. For its dimensions, it weighed very little – only 2.5 tons. Under the hood was a 500 horsepower Chevy 350 eight-cylinder engine. It accelerates to hundreds in 6 seconds, and reaches a maximum speed of 177 kilometers per hour. The priority was the strength of the structure, because the car had to withstand jumps up to 9 meters in height and remain unharmed. However, in real life it is still a fantasy.

💡 curiousthat for the first time on the screens “Batmobile” appeared in the teenage animated series of the 60s. The film version of the car was created based on the Lincoln 1950 concept – this was the first and last time that the vehicle of the main character of DC was similar to a real car.

Lexus 2054 from Minority Report (2002)

Lexus in 2002 looked into the future and created a car that, according to engineers, meets the requirements of 2054. The concept car was designed by Harald Belker. The result was a super-fast two-seater sports car with a front cab, low ground clearance and a closed wheelbase. In the film, the car was equipped with voice control, analyzed the driver’s mood and selected the appropriate musical accompaniment for him. Today, fans can purchase the closest copy called Vetter Custom Dimensia 2016. Of course, the replica was devoid of cinematic goodies, including the ability to fly. But it was equipped with a 2.7-liter six-cylinder Porsche engine.

Aston Martin DB10 from the movie “007: Spectrum” (2015)

James Bond managed to change a lot of cars – among them were the Ford Mustang, BMW Z8, Toyota 2000 GT, Lotus Esprit and more. However, Aston Martin models have always been considered the most memorable – he had two of them: DB5 and DB10. The second was created specifically for the filming of Spectrum. A total of 10 such cars were produced – 8 of them were intended exclusively for cinema. They could only simulate driving while the car was controlled from the outside. And here are two advertising models, albeit without spy tuning, but they were on the go. In the movies, Bond’s car was equipped with flamethrowers in the exhaust pipes, a machine gun behind the Aston Martin emblem, and an ejection seat with a parachute.

💡 Interestingthat one of the advertising models in 2016 was sold at an auction in London for $3.5 million. Apparently, the buyer has always been very fond of films about the famous British agent. By the way, all the proceeds went to charity – the Doctors Without Borders Foundation.

Audi RSQ from I, Robot (2004)

Audi engineers developed the RSQ model specifically for the filming of the film “I, Robot”. The body of the car is as streamlined as possible – its wings cover spherical wheels. According to the designer responsible for the appearance of the car, reproducing spherical tires was the most difficult thing in this project – in real life it is almost impossible. Another distinguishing feature is the doors: they are designed like a gull wing, but in the open position they unfold slightly like the wings of a butterfly. Impressively, this futuristic vehicle took just 10 weeks to complete. The interior of the car is more like a jet cockpit: the driver’s seat surrounds the control panel, the steering wheel reclines as soon as the driver takes his seat.

Lotus Esprit S1 from The Spy Who Loved Me (1977)

Another car from the collection of the legendary James Bond. Unlike previous Agent vehicles, the Lotus Esprit S1 does not contain an arsenal of hidden weapons. Its main feature is the transformation into a submarine: with a light touch of a button on the instrument panel, the wheels are replaced by fins. In addition, the car is distinguished by a powerful 2-liter engine with 160 horsepower for that time. This allowed him to accelerate to hundreds in about 8 seconds, and the maximum speed reached 222 kilometers per hour.

💡 curiousthat by the end of the 70s, a floating car had already become a reality plus or minus. Of course, he was very far from the cinematic Lotus Esprit S1, but the Amfikar could easily move both on land and on water. It was designed for military operations, but still could not dive under water.

Cadillac Miller-Meteor from Ghostbusters (1984)

A team of movie heroes turned the hearse into their branded most recognizable transport. They added a flashing light to the roof, and a built-in siren made a modified leopard growl sound played backwards. In addition, the car was filled with a variety of gadgets. It was provided with a retractable gurney for fixing and quickly extracting proton guns, a radar, high-intensity microphones and other devices that were needed for fighting ghosts. Unfortunately, Cadillac management limited the Miller-Meteor to just 400 units. However, fans can still find it on sale – it’s a pity, without all these cinematic devices.

DeLorean DMC-12 from Back to the Future (1985)

DeLorean DMC-12 is a real car that was produced from 1981 to 1983. In total, about 9,000 of these vehicles were produced – today you can still purchase this model from the surviving approximately 6,500 copies (of course, they do not provide a time travel function). The 2.8-liter engine is located at the rear here, the body is made of stainless steel, and the doors received a gull-wing design. The car from the film was completed with bundles of wires, electric blocks, hydraulic pipes and two huge square exhaust pipes. Inside was a “flux condenser” – a fantastic device, indispensable for time travel.

💡 Special attentiondeserves the plutonium chamber that was used in the car. When it was created, engineers were actively inspired by the most ordinary coffee grinder. Apparently, its more advanced version from the next episodes of the trilogy, which could take even ordinary garbage as fuel, was developed in much the same way.

Source: Trash Box

Johanna

Johanna Foster is an expert opinion writer with over 7 years of experience. She has a reputation for delivering insightful and thought-provoking articles on a variety of subjects. Her work can be found on some of the top online news websites, and she is currently lending her voice to the world stock market.