Antec P82 Silent is designed for mino-ITX, microATX and ATX motherboards

Antec has unveiled the Antec P82 Silent computer case. The 454 x 215 x 480 mm case accommodates a mino-ITX, microATX or ATX motherboard and up to seven expansion cards up to 380 mm in length.

Antec P82 Silent is designed for mino-ITX, microATX and ATX motherboards
Antec P82 Silent is designed for mino-ITX, microATX and ATX motherboards

The interior of the modestly designed building is divided vertically. At the bottom there is a power supply unit and two baskets for 2.5 “or 3.5” drives. Mounting for two more 2.5-inch drives is provided in the upper compartment where the system board and expansion cards are located.

Antec P82 Silent is designed for mino-ITX, microATX and ATX motherboards
Antec P82 Silent is designed for mino-ITX, microATX and ATX motherboards

As for the fans, three 120mm or 140mm fans should be attached to the front wall, three 120mm or two 140mm ones on the top, one 120mm or 140mm on the back. Normally, there is a 120-mm one in the back, two 120-mm ones in front. Alternatively, a radiator with a length of up to 360 mm is installed in the front, and a length of 140 mm in the back.

There is a three-position switch on the I / O panel that allows you to select high fan speed, low fan speed, or turn off the fans completely. In addition to it, there are two connectors for USB 3.0 ports, microphone and headphone jacks, buttons and power and reset.

The case costs 83 euros.

.

You may also like