BenQ has released an unusual projector, which the manufacturer itself addresses to gamers. The X3000i is a 4-LED DLP projector that boasts low input lag. At 4K resolution, it supports 60Hz frame rate. Other than that, there are two 1080p game modes. In one, the frame rate can reach 240 Hz with an input lag of 4.16 ms, in the other it can reach 120 Hz with an input lag of 8 ms. The projector is equipped with three HDMI 2.0b ports, one of which includes a module that turns the X3000i into a smart projector. This is a BenQ QS01 module updated to Android 10. In addition to the HDMI ports, there is one USB Type-A 2.0 port that can output 2.5A, an RS232 port, a 12V jack, a 3.5mm audio jack, and an optical S/PDIF output . One of the HDMI ports supports eARC, and the X3000i has a pair of 10W speakers built in.
The description notes a 1.3x zoom option, which can reduce the projection distance. From a distance of three meters, the X3000i can produce an image measuring 120 inches (305 cm) diagonally. There are three brightness settings. The maximum luminous flux is 3,000 lumens and the contrast ratio with light source dimming enabled is 500,000:1. There are also several image presets for RPG, FPS and sports games. The projector weighs 6.4 kg and has a typical power consumption of 330 watts. It costs 1899 euros.
Source: ixbt
Donald-43Westbrook, a distinguished contributor at worldstockmarket, is celebrated for his exceptional prowess in article writing. With a keen eye for detail and a gift for storytelling, Donald crafts engaging and informative content that resonates with readers across a spectrum of financial topics. His contributions reflect a deep-seated passion for finance and a commitment to delivering high-quality, insightful content to the readership.
